Avtech AVC796 User Manual download pdf (Page 42)

REMOTE OPERATION

~38~

8. REMOTE OPERATION

You can also control the DVR remotely via the supplied licensed software “Video Viewer”, Internet Explorer web

browser, and Apple’s QuickTime player.

8.1 Supplied Licensed Software

The sections below describe frequently-used functions of the Video Viewer. For details about this software and

network settings, please download its extended user manual from the following link:

http://www.surveillance-download.com/user/CMS.pdf

8.1.1 Installation & Network Connection

1) Install the software

Step1: Place the supplied CD into your CD-ROM or DVD-ROM drive. The program will be automatically run.

Step2: Click “Licensed Software AP” to install Video Viewer, or click “Download Latest Version” under

“Licensed Software AP” to download the latest version of Video Viewer from the Internet.

Step3: Follow the on-screen instructions to finish the installation. When the installation is completed, a

shortcut icon “ ” will be placed on your PC desktop.

2) Network Connection



(

)

LAN is used when it’s the first time to remotely access the DVR and you need to configure the network

setting of your DVR based on your network type in advance.

1) Connect the DVR to your PC via a RJ45 network cable. The default DVR values are as follows:

Item Default Value

IP address 192.168.1.10

User name admin

Password admin

Port 80

2) Set the PC’s IP address as “192.168.1.XXX” (1~255, except 10) in order to make the PC and DVR under the

same domain.

3) Double-click “ ” icon on your PC desktop to enter the control panel. By defaults, the “Address Book” panel

will be displayed on the right side of the control panel.

4) Click “ ”  “ ” to key in the default IP address, user name, password, and port number of the DVR

you intend to connect.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 65 66

No comments

Avtech AVC796 User Manual Page 42